Secure Large Carrier™

Introducing Secure Large Carrier™, the new large caliber raceway from Holocom. Secure Large Carrier™ provides more than seven times the cable capacity of industry standard Holocom SDS (2” x 2”) Secure Raceway, making it the perfect backbone carrier for home run cable design systems. Secure Large Carrier™:

• Satisfies high-density cable count requirements
• Eliminates the need for multiple, parallel smaller cable carriers
• Uses Holocom's locking technolocy allowing moves, adds, and changes
• Allows installer-friendly mounting techniques such as cable drop-in installation

 Secure Large Carrier™ New Product Bulletin

Raceway and TopCap Kit

Two-piece Secure Large Carrier™ Raceway offers a third Holocom cable carrier option for securing classified network cabling. Secure Large Carrier™ provides more than seven (7) times the cable capacity of industry standard Holocom SDS Secure Raceway, making it the perfect backbone carrier for home run cable design systems. Like SDS Secure Raceway, it uses the patented Holocom locking system enabling users to make moves, adds, and changes. One manufactured mounting point at each end of the raceway aligns with the Mounting Bracket for simplified, labor-saving installation.

• 16-gauge electro-galvanized steel
• Components:           
-  Raceway:   Length 59" x Height 6" x Width 3.4"  
-  TopCap:   Length 59" x Height 2" x Width 1.8"
-  Secure Raceway Joints: Four (4)

• Max 200 CAT 6 cable capacity
• Integrates with SDS Secure Raceway & Secure Mini Dukt™
• One manufactured mounting point 1.5″from each raceway end
• Supplied in 5′sections in a 20′kit
• Total kit weight: 91 pounds
• Powder Coat Finish: White Textured

 SLC-WM-RCW-ST-20 Data Sheet

Mounting Bracket

The Secure Large Carrier™ Mounting Bracket provides three distinct functions. It holds two ends of connected raceway, provides the raceway installation point, and stands the raceway one inch off the wall. The Mounting Bracket has four (4) integrated one-inch spacers and four (4) manufactured mounting mounts for simplified, labor-saving installation. The two upper mounting points align with the mounting points on the two ends of adjoining raceway or connector.

• 16-gauge electro-galvanized steel
• Four (4) manufactured mounting points including two (2)  manufactured mounting points that align with each adjoining section of raceway
• Four integrated one-inch spacers allow 360° inspection
• Packaged individually
• Weight 1.75 lbs
• Powder Coat Finish: White Textured

 SLC-WM-MB Data Sheet

Secure Raceway Joint

The Secure Large Carrier™ Secure Raceway Joint adds rigidity to all Secure Large Carrier™ Raceway or Connector end-to-end joints. Two (2) manufactured mounting points align with the MMPs on the Secure Large Carrier™ Mounting Bracket and Raceway or Connector (SLC-CT-90i/ SLC-CT-90e) allowing simplified, labor-saving installation.

• 12-gauge electro-galvanized steel
• Weight 1.5 lbs
• Two (2) manufactured mounting points
• Packaged individually
• Not powder coated

 SLC-RW-SRJ Data Sheet

Lock Kit

The Secure Large Carrier™ Lock Kit uses the same patented locking technology used with Holocom  2″ x 2″ Secure Raceway. The Lock Kit consists of two parts: Raceway Lock Connector and Lock Body Assembly. When in “lock-down” position, the entire raceway is secure and the enclosed cables are protected. Releasing the lock enables the raceway to undergo moves, adds, and changes (MACs).

• 16-gauge electro-galvanized steel
• Components:
  -  Raceway Lock Connector
  -  Lock Body Assembly with 30″ lanyard

• Total Weight: 1 lb
• Powder Coat Finish: White Textured (Lock Connector)

SLC-LK-KIT Data Sheet

End-to-End Connector

The Secure Large Carrier™ End-To-End Connector securely joins two sections of Secure Large Carrier™ TopCap or Secure Large Carrier™ Connector cover (SLC-CT-90i or SLC-CT-90e) and TopCap.

• 16-gauge electro-galvanized steel
• Weight: 1 lb
• Packaged individually
• Powder Coat Finish: White Textured

 SLC-CT-EE6 Data Sheet

Pull Box 0

The versatile PB0 allows Secure Large Carrier™ (SLC) to cross hallways, transition from a comm room, and transition to SDS Raceway and Secure Mini Dukt™ (SMD) Tube. It has an integrated Interface Sleeve (INF) on each side for SLC Raceway, and two TopCap starter pieces for installing the SLC Lock Kit. The INF assembly is easily removed if unused, and right/left replacement Blank Flanges are included. The PB0 allows SDS Raceway and SMD Tube to exit through the front on either side of the door opening as well as through the top, bottom, or sides (with Blank Flange). Tamper resistant door has internal spring hinge and proprietary back flange and is identical to the User Drop Box doors.

• Height 8" x Width 12.4" x Depth 5.6"
• 16-gauge electro-galvanized steel
• Two (2) integrated Interface Sleeves (SLC)
• Single drop-down door with internal spring hinge and hasp for Sargeant & Greenleaf® padlock
• Includes two (2) Blank Flanges, left and right
• Includes two (2) TopCap Starter pieces
• Total weight: 11.5 lbs
• Powder Coat Finish: White Textured

 SLC-WM-PB0-H1 Data Sheet

90° Internal Connector

The two-piece Secure Large Carrier™ 90° Internal Connector allows Secure Large Carrier™ Raceway to perform a right-angle turn on an inside corner. The 90° Internal Connector has the same height/width dimensions as Secure Large Carrier™ Raceway/TopCap and sits inside the Mounting Bracket for easy installation. Two (2) manufactured mounting points align with mounting points on the Mounting Bracket for simplified, labor-saving installation. A 45° angled bend allows smooth cable movement across the connector.

• 16-gauge electro-galvanized steel
• Two-piece construction
• 45° angled bend allows smooth cable movement
• Weight: 4 lbs
• Two (2) labor-saving manufactured mounting points, one at each end
• Powder Coat Finish: White Textured

SLC-CT-90i Data Sheet

90° External Connector

The two-piece Secure Large Carrier™ 90° External Connector allows Secure Large Carrier™ Raceway to perform a right-angle turn on an outside corner. The 90° External Connector has the same height/width dimensions as Secure Large Carrier™ Raceway/TopCap and sits inside the Mounting Bracket for easy installation. Two (2) manufactured mounting points align with mounting points on the Mounting Bracket for simplified, labor-saving installation. A 3″ bend radius allows smooth cable movement across the connector.

• 16-gauge electro-galvanized steel
• Two-piece construction
• 3″ bend radius allows smooth cable movement
• Weight: 4.75 lbs
• Two (2) labor-saving manufactured mounting points, one at each end
• Powder Coat Finish: White Textured

 SLC-CT-90e Data Sheet